Description
DESCRIPTION:
HERRMAX COTTON PICKER GREASE #00 is a premium quality semi-grease designed for specifically for lubrication and corrosion protection of cotton picker spindle heads. HERRMAX COTTON PICKER GREASE #00 is recommended by HERRMAX Lubricants for use in farm cotton picker spindle equipment and other general purpose agricultural applications where NLGI No: 00 grease is suitable. HERRMAX COTTON PICKER GREASE #00 is manufactured with superior low viscosity base oil and lithium 12-hydroxy stearate soap that provides excellent bearing protection and reduced start up chatter. HERRMAX COTTON PICKER GREASE #00 has excellent temperature stability and will operate smoothly in cold temperatures.
APPLICATIONS:
HERRMAX COTTON PICKER GREASE utilises special low viscosity oils to provide superior protection for the high speed spindles, picker bars and chassis bearings on cotton pickers. It is ideal for pumping through the centralised automatic lubrication systems.
Cotton Picker Spindle Grease eliminates spindle seizure or freeze-up, performs well at startup and is recommended for use where John Deere JDN 305, JDN 360 or International Harvester IH B-27 specifications are listed.
FEATURES:
It has excellent anti-wear properties protect against equipment failure.
It has a superior corrosion resistance against chemical and acidic conditions.
SPECIFICATION LEVELS:
NLGI
AVAILABLE PACKAGES:
180 KG, 18 KG, 16 KG, 14 KG, 4 KG, 3 KG, 2 KG, 1 KG, 0.5 KG
TECHNICAL SPECIFICATIONS:
HERRMAX COTTON PICKER GREASE | TESTING PROCEDURE | UNIT |
|
|||
NLGI Consistency | #00 | |||||
Thickener Type | Lithium 12-Hydroxy Stearate | |||||
Color | VISUAL | Olive Green | ||||
Maximum Operating Temperature | °C | 200 | ||||
Worked Penetration at 25°C, 1/10 mm | ASTM D 217 | 420 | ||||
Dropping Point | ASTM D 2265 | °C | 143 | |||
Base Oil Viscosity at 40°C | ASTM D 445 | cSt | 40,5 | |||
Base Oil Viscosity at 100°C | ASTM D 445 | cSt | 6,1 | |||
Copper Strip Corrosion, 24h, 100°C | ASTM D 4048 | 1b | ||||
Water Washout at 79°C | ASTM D 1264 | %wt | 0,1 | |||
4-Ball EP, Wear | ASTM D 2266 | mm | 0,4 | |||
4-Ball EP, Weld Load | ASTM D 2596 | kg-f | 220 |