Description
DESCRIPTION:
HERRMAX CALCIUM SULFONATE GREASE is a complex (CaSX) grease specially developed for industrial, marine and off-road applications. It is formulated with mineral base oils enhanced with Calcium Sulphonate complex soap, anti-wear, anti-oxidant, anti-rust and corrosion inhibitor additives. HERRMAX CALCIUM SULFONATE GREASE (CaSX) provides excellent load carrying capacity making it suitable for heavily loaded applications. It has an excellent mechanical stability, corrosion protection and water resistance which are important in wet and corrosive environments.
HERRMAX CALCIUM SULFONATE GREASE (CaSX) meets or exceeds key industrial specifications.
APPLICATIONS:
HERRMAX CALCIUM SULFONATE GREASE (CaSX) is recommended for use in:
Industrial, marine and off-road applications
Most heavy duty bearing applications including large plain and anti-friction bearings and other mechanisms requiring a high temperature NLGI 2 grease such as slides cams etc.
In marine and marine applications requiring multi-purpose grease.
FEATURES:
It has an excellent load carrying capacity.
It has an excellent rust & corrosion protection.
It has an excellent thermal and oxidation stability.
It has high pump ability.
It has a high resistance to water wash-out.
It has high adhesive and cohesive properties.
It has a mechanical stability.
SPECIFICATION LEVELS:
NLGI
AVAILABLE PACKAGES:
180 KG, 18 KG, 16 KG, 14 KG, 4 KG, 3 KG, 2 KG, 1 KG, 0.5 KG
TECHNICAL SPECIFICATIONS:
HERRMAX CALCIUM SULFONATE GREASE | TESTING PROCEDURE | UNIT |
|
|||
NLGI Consistency | 2 | |||||
Thickener Type | Calcium Sulfonate (CaSX) | |||||
Colour | VISUAL | Blue | ||||
Maximum Operating Temperature | °C | 295 | ||||
Worked Penetration at 25°C, 1/10 mm | ASTM D 217 | 175 | ||||
Dropping Point | ASTM D 2265 | °C | 260 | |||
Base Oil Viscosity at 40°C | ASTM D 445 | cSt | 344 | |||
Base Oil Viscosity at 100°C | ASTM D 445 | cSt | 39,4 | |||
Copper Strip Corrosion, 24h, 100°C | ASTM D 4048 | 1b | ||||
Water Washout at 79°C | ASTM D 1264 | %wt | 3,3 | |||
4-Ball EP, Wear | ASTM D 2266 | mm | 0,5 | |||
4-Ball EP, Weld Load | ASTM D 2596 | kg-f | 500 | |||
Timken OK Load | ASTM D 2509 | lb-f | 70 |