Description

DESCRIPTION:

HERRMAX MECHA ISO 32 VG HYDRAULIC OIL is a mineral oil, specifically designed to meet the requirements of most important manufacturers of hydraulic equipment. It contains anti-wear, anti-oxidant, anti-corrosion and anti-foam additives. The designation HLP 32 is based on the letter combination “HLP” and “32”. HLP are the code letters of the hydraulic fluid, which are defined in DIN 51524-2. These are hydraulic oils with anti-ageing and anti-corrosion additives as well as active agents for reducing friction and wear. The number 32 is due to the kinematic viscosity of the hydraulic oil (in mm²/s) at 40 °C. The respective viscosity classes were specified in the ISO VG.

APPLICATIONS:

This oil is specifically designed to satisfy the requirements of the manufacturers of hydraulic systems where the highest demands are made concerning high pressure, temperatures or speeds. It is recommended for the hydraulic systems of the following types : Vickers, Gerotor, Gresen, HPM, Denison, Cessna, Hydreco and Worthington. It is also suitable for the lubrication of workshop equipment, reducing gears, bearings, compressed air systems and air screw compressors.

SPECIFICATION LEVELS:

AFNOR: NF E 48-603 HM

AFNOR: NF E 48-690

AFNOR: NF E 48-691

ASTM: D6158 HL, HM

BOSCH REXROTH: Approval RDE 90235

CHINESE STANDARD: GB 11118.1 L-HL,L-HM

CINCINNATI: MACHINE P-68 (ISO 32)

DANIELI: 0.000.001Rev.15 Typ 10/11

DENISON: HF-0, HF-1, HF-2

DIN: 51524 Part 2

EATON VICKERS: I-286-S

EATON VICKERS: M-2950-S

EATON: Brochure 03-401-2010

EATON: E-FDGN-TB002-E

GM: LS2 AW hyd.oil

ISO: 11158, HM

ISO: 6743-4, HM

JCMAS: HK P041

SAE: MS1004

US STEEL: 126

ZF: TE-ML 07H

AVAILABLE PACKAGES:

1 LT, 3 LT, 4 LT, 5 LT, 7 LT, 10 LT, 16 LT, 18 LT, 20 LT, 208 LT, 1000 LT

TECHNICAL SPECIFICATIONS: